| Product Name: | Adson Dressing Forceps 1x2 Teeth | Telescoping Rabiner Babinski Percussor | Forceps Kelly-Rakin Clamping Straight 6.5" S.S. | Forceps Kelly Clamping Curved 5.5" SS | Troemner Heavyweight - All Gold Mega | Backhaus Towel Clamp 5.25 inches | Adult Nylon Cuff 1-Tube Bladder | Rabiner-Babinski Percussor | Troemner Bumpers - Regular Size Set | Forceps Mosquito Clamping Straight 5" S.S. | Quad OP-Amp 26 volts - LM2902 | Dejerine Percussor - Stainless Steel Regular Length | Dejerine Chromed Regular Length |
| Product Description: | 4.8" stainless steel Adson dressing forceps with 1x2 teeth at tip of jaw. For fine work. Also available with simple serrations and with 8x8 teeth on jaws (see Adson Brown in surgical index category) . The Adsons now in stock are high grade reusable with a passivated surface to resist corrosion.
| Its length from the pointed tip of its handle to its very farthest part in the bumper is 5.75 inches, 6 inches, 15.25 inches of 15.5 inches depending on whether it is fully compacted or fully extended and whether the bumper axis is pointing in the direction of the handle or perpendicular to it. This fine extendable Rabiner Babinski percussor has been fitted with one of our never-age bumpers. It will not get hard, it will not get gooey or liquefy, it will not deteriorate with time, it will not crack even when exposed to ozone the way rubber does. It is hard to find an extending Rabiner Babinski percussor that isn't an atrocious instrument, but Medworks insists on quality you can count on. Its nominal weight is 4.6 ounces but may vary from 4.5 to 4.7.
| This Kelly-Rakin is a straight jaw, clamping Hemostatic Forceps, 6.5" in length. It is available with a serrated curved or straight jaw. This instrument is bigger and more sturdy than the smaller regular Kelly forceps. If you are looking for a delicate jaw with serrations and clamp, look at the Mosquito available curved or straight 3.5" or 5". All of these clamping forceps are stainless steel and floor grade which means it is for regular use, not an operating room. Imported.
| The Kelly Hemostatic Forceps are available either curved or straight, 5-1/2". It is stainless steel and floor (generic) grade which means it is for regular use, not an operating room. Imported. Quantity pricing available. See separate listings under Forceps.
The difference between Crile and Kelly forceps: Both are hemostatic clamping with serrations. Kelly's go halfway to the hinge. On the Crile they go the full jaw length.
Illustrations of various serrations and clamping forceps variations can be seen in an article under Surgical Articles.
| The ultimate gift without any compromise for excellence in function. Never-age bumpers, same size and weight as the Minnesota Presentation half-gold hammer. VERY LIMITED PRODUCTION. Buy your hammer now - they will not last long. Stainless steel Troemner with gold plating that is hard and does not rub off. Heavier head than our Regular Model. 201 grams total weight. It has the same weight as the -- Minnesota Hammer. | Stainless steel 5.25" Backhaus Towel Clamp. Tips are sharp for grasping
the towel. Like many of our surgicals, these are "floor grade". That is
the equivalent to "generic" in drugs. Made well but not the brand name.
Design has a scissor like handles and a locking clamp that tightens in 3
degrees to hold tight. Also available in 3.5" size. See index for
complete list and compare features. | Lumiscope Cat. # 109-219 - Gray color adult cuff for a 1-tube blood pressure sphygmomanometer from Lumiscope. Note that this is for an arm circumference of 8.66 to 12.6 inches. Please note some blood pressure monitors use a 2-tube bladder and some use a 1-tube bladder. This works only with the type BP monitor that has the inflation bulb/head on a single tube. Fabric is made of nylon. We also have a 1-tube replacement cuff/bladder with a cotton cuff. Please see our index if you prefer cotton. Available only in gray. But it's a nice gray. | Chromed brass with pin at bottom that can be unscrewed for point test or left in place. Clean with alcohol after every use. 23 cm, 148.8 gm. Medium bumper. Also see "Never Age Bumper" to fit this and Queen's Square Adult Percussor for superior softness and durability. Head screws on horizontally or vertically to achieve various reflexes.
| This is for a pair of bumpers - one large and one small - to fit our regular Troemner as we have sold it for about a decade. The base of the large bumper is about the size of a dime. The material is never-age super soft. The color is black. We do not guess whether our bumpers fit percussors manufactured by other companies.
Dimensions:
Large bumper:
Diameter of base with lip (diameter 2): 18 mm (.71 inch)
Diameter of base above lip (diameter 1): 16 mm (.63 inch)
Height including lip (length 1): 18 mm (.71 inch)
Height above lip (length 2): 13.5 mm (.53 inch)
Small bumper:
Diameter of base with lip (diameter 4): 8.5 mm (.33 inch)
Diameter of base above lip (diameter 3): 6.5 mm (.26 inch)
Height including lip (length 4): 11 mm (.43 inch)
Height above lip (length 3): 9 mm (.35 inch)
| Mosquito Clamping (Hemostatic) Straight jaw Forceps: Stainless steel, 3 position clamp,
serrations on jaw go from tip to base. Available Straight or Curved.
Single and quantity pricing available. If you are looking for a sturdier
clamping forceps you might look at Kelly or Crile. All of these
clamping forceps are stainless steel and floor grade which
means it is for regular use, not an operating room. Imported. | Rated at 26 volts. Temperature compensated 1 MHz unity gain bandwidth, PDIP package. Output voltage swing from negative rail to 1.5 volts below positive. Typical input offsest voltage 2 mV, offset
current 5 nA.
| Stainless with pin in base. Use it and clean carefully with alcohol each use or leave it in the handle. Nice balance on a compact, useful percussor. These hammers are first quality: 20 cm length, nominally 120 gm (tolerance 4.15 to 4.25 ounces or 117.5 to 120.5 g).
| Chromed brass with pin in base. Use the pin and clean it each use with alcohol, or leave it in the handle and never take it out.
These hammers are first quality: 20 cm length, nominally 131.7 gm, but being hand cast despite looking almost the same, they vary in weight from 4.50 to 4.95 ounces or 127.6 to 140.3 g. If this small weight difference matters to you, ask us for a heavier or lighter hammer and we'll give it our personal attention. |
